2024 Case IH Pull-Type Disc Mowers TD103

Current Case IH Mowers-and-Conditioners Pull-Type Disc Mowers

Swipe to View More

Year 2024
Make Case IH
Model Pull-Type Disc Mowers

Pull-Type Disc Mowers

Pull-type disc mowers feature a smooth ride, clean cut, superior trailing ability, low transport height, and easy tractor hookup.

Superior Productivity, Trailing Simplicity

With a rugged and reliable design, Case IH Pull-Type Disc Mowers deliver superior crop flow that reduces streaking and ensures quick mowing. The TD103 can be pulled by lighter weight tractors, has a narrow transport width and hookup is quick and easy.

The Case IH TD103 pull-type disc mower features a smooth ride, clean cut, superior trailing ability and narrow transport width, plus easy tractor hookup using a simple clevis hitch.

Features may include:

Superior Crop Flow

Versatility and Convenience

Quick-change knives cut change time in half – the provided tool makes no wrenches necessary

Crop deflector shields behind each end of the cutterbar direct cut crop into a wide swath inside the tire path

Two end discs co-rotate to provide a narrower swath

Adjust swath from 60–95 in. (1.5 m–2.4 m)

Left cutterbar shield is hinged for easy service access

Unmatched reliability

Shock protection to minimize repair expense

Discs protected from internal gear damage by the drive hub

Durability at Every Degree

80-Degrees Constant Velocity Joint

Overload protection is standard

Primary PTO uses an 80-degree constant velocity joint at the tractor end to permit tight turns, reduce noise and extend service life

Standard tractor tire bumpers protect PTO driveline and tractor tires

Tilt Adjustments

Tilt is adjustable from 2–10 degrees using a mechanical turnbuckle

Easy Transition from Field to Road

Attaching and detaching the mower from the tractor is easily accomplished with a simple clevis hitch. The TD103 can be pulled by lighter-weight tractors, as weight is pulled versus carried on a 3-point hitch.

Transport width is just 10 ft 10 in (3,300 mm) when end shields are folded

Removable parking jack stand is stored on top of tongue assembly

Hydraulic tongue swing cylinder powers the unit from transport to operating position

Has a 12-in (305-mm)-minimum cutterbar ground clearance in transport position

Hinged right-side cutterbar shield folds up for narrow transport

Safety tow chain standard

Low transport height eliminates the need for implement lights

Worry-Free Operation

3-year cutterbar warranty includes one full-year of base factory warranty, plus two additional full years and unlimited hours of extended factory disc cutterbar warranty

PTO

PTO Power, Rated Engine Speed Disc @ Rated: 2,835 rpm | Min. Required: 60 hp

PTO Type Splines: 6-Splines

Drivetrain

Driveline Protection: Slip clutch and overrunning clutch assembly @ rear of PTO shaft

Wheels & Tires

Tires, Rear Specification Tubeless Ag Rib Implement: 27×9.5-15 6PR

Operational

Operating Speed Input: 540 rpm | Max. Transport: 20 mph (32.2 kph)

Hydraulics

Hydraulic Type Circuits Required: 2

Minimum Hydraulic Pressure Relief Required: 1,500 psi (103 bar)

Chassis

Hitch/Type Drawbar Requirements – ASAE: ASAE Category 2 drawbar

Dimensions

Dimensions Pto Diameter: 1.375 in. (35 mm)

Cutting Width 10 ft. 4 in. (3.15 m)

Height Cutting: .95 – 3.2 in. (24 – 81 mm)

Width Swath: 95 in. (2.4 m)

Transport Width 10 ft. 10 in. (3.3 m)

Overall Width 16 ft. 4 in. (4.9 m)

Transport Length 15 ft. 8 in. (4.8 m)

Length Operating: 15 ft. 3 in. (4.6 m)

Transport Height 62 in. (1.6 m)

Ground Clearance w/ Header Fully Raised: 11 in. (279 mm)

Weights

Weight, In Running Order Operating: 2,610 lb. (1 186 kg)

Features

Features Number of Discs: 8

Cutterbar Type Modular | Shear Protection: Standard - Frangible splines in disc drive hub | Flotation: Vertical and lateral, adjustable springs

Knife Quantity Per Disc: 2

2024 Case IH Pull-Type Disc Mowers TD103